An electric roller garage door runs from a standard 13-amp socket in the garage, and for most of the year that is the last anyone thinks about it. Then a storm takes the power out for an evening and the questions start. The answers are reassuring, and they are the same on every RollRite door, because the manual override that deals with a power cut is part of every package rather than an optional extra.
What Happens the Moment the Power Goes
The motor stops. That is all. The curtain stays exactly where it was when the supply dropped, held in the guide runners by the motor itself. A closed door stays closed. An open door stays open. A door that was moving stops part way and waits. There is no spring under tension to release, no counterbalance to fail and nothing to fall, which is one of the quieter advantages of a roller door over the up and over doors most of them replace.
The remotes will not do anything while the power is off, and neither will the key switch, because both of them simply tell the motor what to do. The motor needs mains to do it.
Nothing Unlocks and Nothing Drops
A closed roller door in a power cut is as secure as it was a minute earlier. The curtain is held by the motor and sits inside the guide runners on both sides, and the anti-lift locking that stops the door being forced up from outside does not depend on electricity. There is no external handle or lock to pick, so there is nothing a power cut exposes. If the lights go out on a dark November evening, the garage is still shut.
The Manual Override Every RollRite Door Includes
Every RollRite package, from the 55mm door with a key switch upwards, includes a manual override inside the garage. It is a winding handle that connects to the override point on the motor, usually at the end of the box above the opening, and turns the motor by hand. Wind one way and the curtain rises; wind the other and it lowers. It is slower than pressing a button, a minute or two rather than seconds, but it needs no power at all, so you can get the car out on the morning after a storm and close the door behind you.
Two things worth knowing. First, the override is for the motor, not the curtain: never try to lift the curtain itself, because the motor is holding it and forcing it can bend slats or pull the curtain out of its guides. Second, know where the handle lives before you need it. We show you at the handover, and it is worth a glance at the start of each winter.
When the Roller Door Is the Only Way In
An internal override assumes you can get into the garage. Most garages have a side door or a door through from the house, so that is fine. Some do not: the roller door is the only way in and out. In a power cut with the door closed, an internal override is on the wrong side of the curtain.
That is what the external manual override is for. It is a lockable override point on the outside of the garage, so the winding handle can be used from the drive with a key. RollRite fit it as an extra at £160 inc VAT, and we will tell you at the survey if your garage needs it. If you only ever reach the garage through the roller door, it is the one extra we would not skip.
Three Habits for Storm Season
- Know where the override handle is. Hanging on a hook in the garage, not in a drawer in the house you cannot reach because the door is shut.
- Keep the socket accessible. If the garage becomes storage over the winter, make sure boxes do not end up in front of the socket or the fuse board, so a tripped switch can be reset in seconds.
- Do a dry run. Once a year, with the power still on, fit the handle and wind the door a few turns so you know how it feels. The time to learn is not a dark evening in a gale.
When the Power Comes Back
The door works again straight away. The remotes, the key switch and the open and close limits are stored in the motor, not in the mains, so nothing needs reprogramming. If the door stopped part way through a movement, press the remote once so it comes to a proper stop, then run it fully closed and fully open. If you used the override, the motor simply takes over again from wherever you left the curtain.
If the power is back and the door still will not move, it is not the power cut. Check the socket is switched on and the fuse board has not tripped, try the key switch as well as the remote, and put a fresh battery in the remote. A motor that hums without moving, or a door that stops in the same place each time, needs an engineer. Our guide to common roller garage door faults covers each symptom, and the electrical supply an electric roller door needs explains the socket and the fuse board.
Thinking about replacing an old door before the winter storms? Book a free survey and we will show you the override on a real door and tell you whether your garage needs the external kit.
Book a Free SurveyWhat It Costs
The internal manual override is included in every price. A RollRite roller garage door costs from £1,275 inc VAT fully fitted for the 55mm door with key switch operation, and remote control packages with a safety edge start from £1,475 inc VAT. The 77mm profile for wider and double openings starts at £1,790 inc VAT. The external manual override kit is £160 inc VAT on any package. Our roller garage door cost and packages page lists everything each package includes, and the cost calculator prices your own opening with the override added in a couple of minutes.
Key Takeaways
- In a power cut the door stops where it is: closed stays closed and locked, open stays open.
- Every RollRite door includes an internal manual override; wind the motor, never lift the curtain.
- If the roller door is the only way into the garage, add the external override at £160 inc VAT.
- When the power returns, remotes and limits are untouched; run the door fully closed and open once.
Conclusion
A power cut is the least dramatic thing that can happen to a roller garage door. The door waits, the override gets you moving, and the power coming back puts everything as it was. Spend two minutes this autumn finding the handle and the socket, and the next storm is just a dark evening.