"How much is a new garage door?" is the question behind most of our survey bookings, and the answer depends less on the old door than people expect. A replacement RollRite roller door costs the same as a roller door on a new opening, because taking the old one out is part of the job. What changes the price is the opening itself, the slat profile and the package. Here are the numbers as they stand on our price page, and what each old door type means for the work.
The Fitted Prices
Every RollRite price includes the made-to-measure curtain, the electric motor and controls, the box, guide runners, bottom seal and trims, full installation and VAT. There is no fitting charge on top.
- From £1,275 inc VAT: the 55mm door with 9mm insulated slats and key switch operation, for single garages up to 2.7 metres wide.
- From £1,475 inc VAT: the remote control packages with a safety edge, so the door opens from the car and stops and reverses if it meets anything on the way down.
- From £1,790 inc VAT: the 77mm profile with thicker 18mm slats, for wider and double openings up to 5 metres. Above 2.5 metres the price rises by £85 for every 200mm, or part of 200mm, so a white 77 Comfort is £2,045 at 3 metres, £2,470 at 4 metres and £2,895 at 5 metres.
- Colour: white is standard; any other colour adds £100 inc VAT, and matching the box and guide runners in black, anthracite grey or dark brown adds another £100.
- Extras: an external manual override is £160 inc VAT. The largest doors with colour and extras come in at around £3,400 inc VAT.
Our roller garage door cost and packages page lists every package, and the cost calculator gives a fitted price for your own width in a couple of minutes.
What Replacing an Old Door Adds
Nothing, in most cases. Removal of the existing door, with its tracks, springs and fittings, is part of every installation, and a metal door is disposed of free of charge. A small fee applies for non-metal doors such as timber, and the survey tells you if that applies before you decide. The opening is left clean and ready for the new guides.
What Is Coming Out, and What It Means
- Up and over. The most common swap. The steel panel, its frame and the springs come out in one visit, and a roller door goes into the same opening. Our guide to up and over versus roller doors explains what you gain: nothing swings out across the drive and the ceiling inside stays clear.
- Old roller door. A manual roller or an early electric one. The old box and guides come out and the new ones go in; the power supply is often already there.
- Sectional door. The panels, the ceiling tracks and the springs are removed, which frees the whole ceiling.
- Timber side-hinged or up and over. Heavier to take out and the one case where a small disposal fee can apply. The frame usually comes out with it.
When Building Work Is Needed
Rarely. A roller door fits to the structural opening, either inside the reveal or on the wall around it, so the brickwork is not touched. The survey checks three things: the opening itself, the headroom above it for the box, and about 75mm of side room each side for the guide runners. Our guides to headroom and to measuring the opening give the numbers. If a garage needs more than that, we say so at the survey, not on installation day.
An electric door needs a standard 13-amp socket in the garage. Most have one; if yours does not, the survey flags it.
Repair or Replace
Not every tired door needs replacing. A roller door with a worn seal or a slow motor is a service; an up and over with a snapped spring is a repair. The line is crossed when the door no longer locks, no longer closes fully or costs more to keep going than it is worth. Our guide to when to repair or replace a garage door sets out the signs, and our case study of replacing an old garage door with an electric roller shows a real swap from start to finish.
Booking a Survey for the New Year
The survey is free, takes under an hour and ends with a fixed written quote that includes everything above. Booked over the holidays, it gives you the quote to consider in your own time; the door is made to measure once you accept it. We only promise the dates the website states, so the honest advice is that an early survey is the quickest route to a new door in the new year. We are based in Sible Hedingham near Halstead and cover Essex plus parts of Suffolk, Hertfordshire and the east London border.
Want the exact price for your garage? Book a free survey and we will measure the opening, look at the old door and leave you a fixed written quote with removal included.
Book a Free SurveyKey Takeaways
- From £1,275 inc VAT fully fitted; remote packages from £1,475; 77mm doors from £1,790.
- Replacing an old door adds nothing: removal is included and metal doors are disposed of free.
- Width, profile, package, colour and extras set the price; height does not.
- Building work is rare; the survey checks the opening, headroom and side room first.
Conclusion
A new garage door in Essex costs what the opening and the package cost, and the old door coming out does not change that. Measure if you are curious, run the calculator for a guide price, and let the survey turn it into a fixed quote you can sit on until January.